Health Centers
 loading...
if not loaded., try Site map to view all
 
 
 
 
bookmark | print this page | mail to friend | site map | help

Food Safety

FONT SIZE

T T T

Three Ways to Purify Water

 

In addition to having a bad odor and taste, contaminated water can contain microorganisms that cause diseases such as dysentery, typhoid and hepatitis. You should purify all water of uncertain purity before using it for drinking, food preparation or hygiene. There are many ways to purify water. None is perfect. Often the best solution is a combination of methods.

Two easy purification methods are outlined below. These measures will kill most microbes but will not remove other contaminants such as heavy metals, salts and most other chemicals. Before purifying, let any suspended particles settle to the bottom, or strain them through layers of paper towel or clean cloth.

BOILING.
Boiling is the safest method of purifying water. Bring water to a rolling boil for 3-5 minutes, keeping in mind that some water will evaporate. Let the water cool before drinking.
Boiled water will taste better if you put oxygen back into it by pouring the water back and forth between two clean containers. This will also improve the taste of stored water.

DISINFECTION.
You can use household liquid bleach to kill microorganisms.
Use only regular household liquid bleach that contains 5.25 percent sodium hypochlorite.
Do not use scented bleaches, color safe bleaches or bleaches with added cleaners.
Add 16 drops of bleach per gallon of water, stir and let stand for 30 minutes. If the water does not have a slight bleach odor, repeat the dosage and let stand another 15 minutes. The only agent used to purify water should be household liquid bleach. Other chemicals, such as iodine or water treatment products sold in camping or surplus stores that do not contain 5.25 percent sodium hypochlorite as the only active ingredient, are not recommended and should not be used.
While the two methods described above will kill most microbes in water, distillation will remove microbes that resist these methods, and heavy metals, salts and most other chemicals.

DISTILLATION.
Distillation involves boiling water and then collecting the vapor that condenses back to water. The condensed vapor will not include salt and other impurities. To distill, fill a pot halfway with water. Tie a cup to the handle on the potís lid so that the cup will hang right-side-up when the lid is upside-down (make sure the cup is not dangling into the water) and boil the water for 20 minutes. The water that drips from the lid into the cup is distilled.

 


 
Your feedback?




 
 

Rate this page?
Good Average Poor



Rating accepted

Thanks for your note! Suggestion if any, will be taken up by the editor squad on a prority. We appreciate your gesture.
Hecapedia squad
Improve hecapedia - Join the squad


 
 
Nothing on this web site, in any way to be viewed as medical advice. All contents should be viewed as general information only.
All health care decisions should only be made with consultation from your physician.

About us | Link to us | Contact us | Associates | Media Center | Business services | Feedback | Report Bugs | Sitemap | Help
privacy policy | disclaimer | terms and conditions | accessibility | anti-spam policy
© 2006 hecapedia